PITTSBURGH,FATSO, OREGON,KLONDIKE & YUKONPOT - BELLY STOVESINSTALLING ANDOPERATINGINSTRUCTIONS585845
Before lighting the fire, the damper must be fully open (its handle in line with the flue).If your stove has a STEADIHEAT control, its handle should b
REFUELLING (See FUEL, above)We recommend that the top door, rather than the hot-plate opening, be used forrefuelling.CAUTION: ALWAYS EN
STOVE DIMENSIONSPittsburgh Klondike Fatso Yukon OregonFrontViewSideView850510545580650380420460675510560545580545380420490380580420500470BellyRing Di
THIS BOOK CONTAINS IMPORTANT INFORMATION.PLEASE KEEP IT IN A SAFE PLACE FOR FUTUREREFERENCE.CONTENTSINTRODUCTION...
UNPACKING – PITTSBURGH & FATSOTo facilitate shipping, the top belly is packed upside down inside the bottom belly.First bolt the four legs securel
UNPACKING – KLONDIKE, YUKON AND OREGONThese models are shipped with the bellies in their final orientation, but the joint betweenthe top and bottom be
If the stove is a YUKON fitted with a straight flue socket, the clearance measurement istaken from the belly ring and 80mm must be added to the minimu
IMPORTANT: If the screen material is a single layer and is thick (e.g. concrete or brick),the stove must be at least 150mm from the face of the screen
FLUE INSTALLATIONThe stove must be installed using a Masport approved flue kit (including a ceiling plate).Approved flue kits are supplied with detail
INSTALLING A STOVE WITH A WATER COILPot belly stoves may be installed in some parts of New Zealand but not in Australia. Allplumbing work must meet th
OPERATING INSTRUCTIONSBEFORE LIGHTING THE FIRST FIREIf your flue is a bright stainless steel one, remove all fingerprints and other marks bypolis
Comments to this Manuals